HSV Clubsport Stroker Build: 395kW at the Wheels — Power Torque Performance
Featured Build · A name you can trust since 2000

HSV Clubsport.
6.6L stroker.
395kW at the wheels.

This VZ Clubsport came in for a twin-plate clutch. Once it was apart, we found damage further down the driveline. With the engine coming out anyway, the owner went all the way: a stroker bottom end, CNC ported heads, a new cam and a fuel system to match.

395kW
Rear-wheel power, 395.1kW at 6,732RPM
Up from 339.3kW on its previous tune with us
610Nm
Torque at the wheels, up from 533Nm
More everywhere, not just at the top
6.6L
Stroker V8, naturally aspirated
No blower, no turbos. Just a bigger, better-breathing engine

In for a clutch.
Out with a stroker.

The job started as a twin-plate clutch upgrade. With the gearbox out, we found a damaged tailshaft centre bearing, a cracked bell housing and gearbox damage. That's the kind of thing you want found on a hoist, not on the road. With the engine coming out, the owner chose to do the lot. A Callies crank, Compstar rods and SRP Pro pistons went into the bottom end. On top went CNC ported heads with new valves, a new cam package, a FAST LSXR intake and new headers. Then the fuel system was upgraded to feed it, and it was tuned on our hub dyno in Brendale.

Previous tune
339.3kW
533Nm · April 2026
New engine final
395.1kW
610Nm · 13 November

Both runs were done on our Mainline hub dyno. The first is the car's previous tune with us, from April. The second is the new engine's final tune. That's around 530hp at the wheels from a naturally aspirated V8 that still wears its Clubsport badges.

View the dyno sheet →

Stroker bottom end, CNC ported heads, new cam package, FAST LSXR intake, new headers, upgraded fuel system, twin-plate clutch and a custom tune. 395.1kW and 610Nm at the wheels.

Want to see
the blown one?

This one went bigger and stayed naturally aspirated. Our Stage 4 Clubsport went the supercharged route, with a Harrop FDFI 2300 on top. They were both planned around how the owner wanted to use the car.

See the Stage 4 Clubsport

Supercharged, engine-out, proven on the same dyno.

Engine out once,
done properly.

Pulling an engine is a big job. If it's coming out anyway, it's the cheapest time to do everything you'll want later. That means doing it as one plan, not a string of parts bolted on over the years.

Found it early

A damaged centre bearing, a cracked bell housing and a hurt gearbox were all found during the clutch job, before any of them let go.

Bottom end to top end

Crank, rods, pistons, ported heads and cam were all chosen together, so every part suits the rest.

Fuel to match

A bigger engine needs more fuel, and it needs it reliably. A VCM surge tank, new lines, a regulator and upgraded injectors make sure it gets it.

Proven on our dyno

This car was already tuned on our dyno, so we know exactly what the new engine added. You see the sheet before you leave.

More than
a clutch job.

Here's what it actually involved, from the clutch job it started as to the final dyno run.

  • Twin-plate clutch with a remote bleeder
  • Replacement gearbox, bell housing and tailshaft fitted
  • Engine out, machined and built as a stroker
  • Callies crank, Compstar rods, SRP Pro pistons
  • CNC ported heads with new valves
  • Cam, lifters, oil pump and timing chain
  • Upgraded fuel system and injectors
  • Custom tune on our hub dyno
Scope

Every build like this starts with the car and what you want from it. Some owners want a reliable street car, others want every kilowatt. We'll tell you straight what that takes.

Pricing

Engine builds are priced on the car, its condition and the parts list. Get in touch for a straight quote before you commit to anything.

Holden & HSV

Holden and HSV V8s are what we've built our name on since 2000. Whether it's a service, a cam upgrade or a full engine build, it's work we do every week.

Build breakdown

Everything that went into this Clubsport, grouped by area.

  • Bottom End
  • Callies crank
  • Compstar rods
  • SRP Pro pistons
  • Oil pump and timing chain
  • ARP bolts and new gaskets
  • Machining and assembly
  • New sump
  • Heads, Cam & Induction
  • CNC ported heads, new valves
  • Cam and lifters
  • FAST LSXR intake
  • New headers
  • Upgraded catch can
  • Fuel, Driveline & Tune
  • VCM surge tank
  • Fuel lines, regulator and wiring
  • Upgraded LSA injectors
  • Twin-plate clutch, remote bleeder
  • Gearbox, bell housing, tailshaft
  • Custom dyno tune

From enquiry
to dyno day.

1
Enquire

Tell us the car and what you're chasing. We'll tell you what's involved and put a plan together.

2
Inspect & plan

We check what's there first. If we find something that needs doing, you hear about it before anything changes.

3
Build & fit

Engine, fuel system and driveline are built and fitted properly as one job.

4
Dyno tune & prove it

Custom tune on our hub dyno. You see the sheet before you leave.

Got a Holden or HSV
with more in it?

Clutch, cam or a full engine build, tell us the car and what you're chasing. We'll tell you straight what's involved before you commit to anything.

A name you can trust since 2000.

(07) 3881 3999 — Brendale, Brisbane
info@powertorqueengines.com.au
⚡
POWER TORQUE PERFORMANCE
Online · Usually replies in minutes
GET A QUOTE FOR
YOUR BUILD

Tell us about your car and what you're chasing — big or small, we'll scope it properly and get back to you within one business day.

Tell us your engine, combo and goals
We'll scope the build and put a plan together
Expect a reply within 1 business day

Or email us: info@powertorqueengines.com.au

Prefer a form?

Send us the details and the team will get back to you within one business day.

Or call us on (07) 3881 3999.

✓

Thanks, we've got it.

Your enquiry is with the team. Expect a reply within one business day.

● Verified customer feedback

What customers say about Power Torque

A name you can trust since 2000.

4.7
Based on 115 Google Reviews
Read all reviews on Google →

Mitch and everyone at PTP were awesome, they put a package together for me and turned out my dream car. Full engine out — cam, lifters, oil pump, ceramic headers and full exhaust system, then dyno tuned to be street livable.

Brett P. Google review · Jan 2026

The team did a great job on my Jag SVR. We did a stage 2 tune with a pulley upgrade. It runs super smooth and made some great power gains!

Jordan Lowry Google review · Nov 2025

Outstanding service from the team on my vehicles. I've driven in my 3 Holdens and driven them out with a transformation that's unreal! Highly recommend the team for their knowledge, workmanship and pride.

Scruba's Detailing Google review · Jul 2025

Highest accolade possible. Customer engagement, support, professionalism, and knowledge all first class. The work completed was great and I'm happily recommending the team to my network.

Liam Ringelstein Google review · Jan 2025

Amazing service — Mitch tuned my Holden and did an amazing job, was thorough throughout the whole tune making sure everything was perfect. 100% recommend.

Samuel Intelisano Google review · Jul 2025

We Have Engineered Performance Systems For Almost Every Application

A name you can trust since 2000.

info@powertorqueengines.com.au(07) 3881 39991/48 Kremzow Road, Brendale QLD 4500

Tuning

© 2024 Power Torque | All Rights Reserved | Developed byweb design brisbane